Features
- Safe & Reliable: Cobalt-free LiFePO4 batteries for enhanced safety and performance.
- Modular Design: Scalable up to 25 kWh to meet growing energy needs.
- Weather-Resistant: IP65-rated for outdoor durability.
- Flexible Mounting: Options for wall or ground mounting.
- High Efficiency: Up to 90% depth of discharge for maximum energy utilisation.
- Remote Upgrades: Firmware updates ensure optimal performance over time.
Model
BU2-5.0-HV1
Usable Storage Capacity
4.5 kWh
Total Storage
5 kWh
Battery Cell Technology
Lithium Iron Phosphate (LiFePO4)
Dimensions (WHD)
626mm x 261mm x 365mm
Weight
50.5 kg
SAJ B2 Series Solar Batteries for Energy Storage in Perth
The SAJ B2 Series is a versatile solar battery with a storage capacity ranging from 5 kWh to 25 kWh, making it suitable for various energy needs. Featuring a modular design, the B2 battery can easily be scaled to match your requirements. Built with cobalt-free LiFePO4 cells, it delivers exceptional safety and performance. Plus, its IP65-rated design ensures durability even in harsh outdoor conditions.
Energy Independence and Reliable Backup
More than just a high-capacity battery, the SAJ B2 Series ensures energy independence by storing solar energy for use during blackouts or low-sunlight days. The included BMS controller and battery modules make installation seamless, so you can start using it immediately. Whether wall-mounted or ground-mounted, this battery is tailored to fit your setup and maximise efficiency.
Product Specifications
SAJ B2 5kWh Home Battery (1 Module)
| Feed-In Type | Single Phase |
| Rated Energy | 5 kWh |
| Usable Energy | 4.5 kWh |
| Rated Power | 3072 W |
| Dimensions (W x H x D) | 626 mm x 261 mm x 365mm |
| Weight | 121 kg |
| Nominal Voltage | 102.4 V |
| Operating Voltage | 89.6 – 115.2 V |
| Max. Charge Current | 30 A |
| Max. Discharge Current | 30 A |
Control Module
| Max. Fault Current | 100 A |
| Dimensions (W x H x D) | 626mm x 220mm x 365mm |
| Weight | 11 kg |
General Parameters
| Ingress Protection | IP65 |
| Mounting | Wall-Mounting (optional)/Ground-Mounted |
| Operating Temperature Range | Charging: 0～50℃; Discharging: -10～50℃ |
| Ambient Humidity | 0～95% non-condensing |
| Cooling Method | Natural convection |
| Communication | CAN |
| Applicable Standard | IEC 62619(Cell & Pack), EN 62477-1, EN 61000-6-1/2/3/4, UN38.3 |
Â
Compatible Products:
Get In Touch
Get More Information
Contact us at the below information or fill in the form, and we will be in touch to schedule a booking.
Phone
+61 437 374 383
sales@electralinkptyltd.com
Location
8/2 Panama St, Canning Vale WA 6155
Open Hours
Mon - Fri, 7am - 5pm
Sat - Sun, Closed
Contact Us
Get A Free Quote
